Current location :  Encyclopedia

Three ways of using the general monitoring table in the control room of the command center

Befrom:安贝斯Newstime:2017-11-27 15:48:27Author:zhangxp
安贝斯控制台定制专家

WHL安贝斯控制台厂家

Use the general control console in the control room and in three, one of the most standard tablet monitoring station, with direct horizontal pendulum, the computer monitoring station a lot together to form a large plane security monitoring station.WHL安贝斯控制台厂家

1, the Public Security Bureau monitoring command center console if need a total of 10 seats and two seats scheduling, a set of 2 seats, each supporting 22 inch display, a total of 18 bearing support 22 inch 16:10 display device, display display after the arm hanging in the console back plate, the back wall height is 320mm. The back wall aluminum structure, after the surface treatment, anti-static, wear EFI to display the arm hanging groove.WHL安贝斯控制台厂家

2, each seat is equipped with a host tray which can host computer host. The keyboard, mouse and monitor are connected with the main engine room by KVM, and the partitions are easy to disassemble, which is convenient for placing KVM and extending equipment.WHL安贝斯控制台厂家

A total of 8 PDU power sources with 3 holes and 3 holes are required for the monitor operating table.WHL安贝斯控制台厂家

 WHL安贝斯控制台厂家

4, each three seats, one information interface, the pop-up way, the interface includes 2 phone, 2 network, 1 VGA, 1 3.5 audio interface, 2 power interface, 1 Mike interface.WHL安贝斯控制台厂家

安贝斯控制台定制专家

LAST:What can the console be divided into a

BACK

安贝斯_红
安贝斯_颖
安贝斯_莎

027-86578008